New IT forum

DreamPlug => Dreamplug Software => Dreamplug booting => Topic started by: NewIT_Malcolm on 28 August 2012, 08:08:38 am

Title: 0901 / 1001 Dreamplug Factory uboot variables.
Post by: NewIT_Malcolm on 28 August 2012, 08:08:38 am
This is for Dreamplugs with code 0901 or 1001 printed on underside sticker. (Wireless 'n' plugs).

Notice Globalscales have switched to using an ext2 partition for partition 1 (uImage) on the internal microSD.

Code: [Select]
bootargs=console=ttyS0,115200 rw root=/dev/sda2 rootdelay=10
bootcmd=setenv ethact egiga0; ${x_bootcmd_ethernet}; setenv ethact egiga1; ${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; bootm 0x6400000;
bootdelay=3
baudrate=115200
x_bootcmd_ethernet=ping 192.168.2.1
x_bootcmd_usb=usb start
ethact=egiga0
x_bootcmd_kernel=ext2load usb 0 0x6400000 uImage
ethaddr=F0:AD:4E:01:56:xx
eth1addr=F0:AD:4E:01:56:xx
stdin=serial
stdout=serial
stderr=serial

Environment size: 460/4092 bytes