New IT forum
27 June 2022, 11:44:59 am *
Welcome, %1$s. Please login or register.

: GertDuino now in stock.
 
Pages: [1]

Author Topic: Dreamplug Bootlog - Ubuntu  (Read 12229 times)

NewITMalcolm

  • Administrator
  • Sr. Member
  • *****
  • Posts: 394
Dreamplug Bootlog - Ubuntu
« on: 20 April 2011, 10:53:10 am »



U-Boot 2011.06-02334-g8f495d9-dirty (Mar 28 2011 - 05:21:06)
Marvell-DreamPlug

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MiB
SF: Detected MX25L1606 with page size 256, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot:  3  2  1  0
No link on egiga0
*** ERROR: `ipaddr' not set
ping failed; host 192.168.2.1 is not alive
*** ERROR: `ipaddr' not set
ping failed; host 192.168.2.1 is not alive
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 4 USB Device(s) found
       scanning bus for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
2 Storage Device(s) found
reading uImage

2712400 bytes read
## Booting kernel from Legacy Image at 06400000 ...
   Image Name:   Linux-2.6.33.6
   Created:      2011-02-08   8:18:48 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2712336 Bytes = 2.6 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Linux version 2.6.33.6 ([email protected]) (gcc version 4.2.1) #1 PREEMPT Tue Feb 8 03:18:41 EST 2011
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell GuruPlug Reference Board
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/sda2 rootdelay=10
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 256MB = 512MB total
Memory: 513408KB available (4832K code, 862K data, 140K init, 0K highmem)
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:114
Console: colour dummy device 80x30
Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Kirkwood: MV88F6281-A1, TCLK=200000000.
Feroceon L2: Cache support initialised.
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
Switching to clocksource orion_clocksource
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
JFFS2 version 2.2. (NAND) \0xc2\0xa9 2001-2006 Red Hat, Inc.
JFS: nTxBlock = 4012, nTxLock = 32102
msgmni has been set to 1003
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
No NAND device found.
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address f0:ad:4e:00:7e:67
net eth1: port 0 with MAC address f0:ad:4e:00:7e:68
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mice: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Registered led device: guruplug:red:health
Registered led device: guruplug:green:health
Registered led device: guruplug:red:wmode
Registered led device: guruplug:green:wmode
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mmc0: new high speed SDIO card at address 0001
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
rtc-mv rtc-mv: setting system clock to 2011-01-20 09:20:54 UTC (1295515254)
Waiting 10sec before mounting root device...
usb 1-1: new high speed USB device using orion-ehci and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using orion-ehci and address 3
scsi0 : usb-storage 1-1.1:1.0
usb 1-1.4: new full speed USB device using orion-ehci and address 4
input: C-Media USB Headphone Set   as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.3/input/input0
generic-usb 0003:0D8C:000C.0001: input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-orion-ehci.0-1.4/input3
scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9910 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9910 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:1: [sdb] Attached SCSI removable disk
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sda: p2 size 3653412 exceeds device capacity, limited to end of disk
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:2.
Freeing init memory: 140K
 [33m*[39;49m Filesystem type 'fusectl' is not supported. Skipping mount.
 * Setting preliminary keymap...       
[ OK ]
 * Starting kernel event manager...       
[ OK ]
 * Loading hardware drivers...        sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 1
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 21
Bluetooth: Core ver 2.15
ata1: SATA link down (SStatus 0 SControl F300)
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
libertas_sdio: Libertas SDIO driver
libertas_sdio: Copyright Pierre Ossman
libertas_sdio mmc0:0001:1: firmware: requesting sd8688_helper.bin
libertas: can't load helper firmware
libertas: failed to load helper firmware
libertas_sdio: probe of mmc0:0001:1 failed with error -2
Bluetooth: vendor=0x2df, device=0x9105, class=255, fn=2
btmrvl_sdio mmc0:0001:2: firmware: requesting sd8688_helper.bin
btmrvl_sdio_download_helper: request_firmware(helper) failed, error code = -2
btmrvl_sdio_download_fw: Failed to download helper!
btmrvl_sdio_probe: Downloading firmware failed!
uap_probe: vendor=0x02DF device=0x9104 class=0 function=1
uap_sdio mmc0:0001:1: firmware: requesting mrvl/helper_sd.bin
uap_sdio mmc0:0001:1: firmware: requesting mrvl/sd8688_ap.bin
UAP FW is active
usbcore: registered new interface driver snd-usb-audio
eth1: link up, 1000 Mb/s, full duplex, flow control disabled
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready

[ OK ]
 * Loading kernel modules...         * Loading manual drivers...       
[ OK ]
 * Setting kernel variables (/etc/sysctl.conf)...       
[ OK ]
 * Setting kernel variables (/etc/sysctl.d/10-console-messages.conf)...       
[ OK ]
 * Setting kernel variables (/etc/sysctl.d/10-network-security.conf)...       
[ OK ]
 * Activating swap...       
[ OK ]
 * Starting early crypto disks...       
[ OK ]
 * Starting remaining crypto disks...       
[ OK ]
 * Checking file systems...        fsck 1.41.4 (27-Jan-2009)

[ OK ]
 * Mounting local filesystems...       
[ OK ]
 * Activating swapfile swap...       
[ OK ]
 * Configuring network interfaces...       
[ OK ]
 * Setting up console font and keymap...       
[ OK ]
 * Starting system log daemon...       
[ OK ]
 * Starting kernel log daemon...       
[ OK ]

 * Starting system message bus dbus        Ubuntu 9.04 ubuntu ttyS0

ubuntu login:
[ OK ]
 * Starting DNS forwarder and DHCP server dnsmasq       
[ OK ]
 * Starting OpenBSD Secure Shell server sshd       
[ OK ]
Starting very small DHCP server: udhcpd (v0.9.9-pre) started
SIOCGIFADDR failed, is the interface up and configured?: Cannot assign requested address
 * Starting Hardware abstraction layer hald       
[ OK ]
 * Starting bluetooth       
[ OK ]
 * Starting Avahi mDNS/DNS-SD Daemon avahi-daemon       
[ OK ]
 * Starting Common Unix Printing System: cupsd       
[ OK ]
 * Starting periodic command scheduler crond       
[ OK ]
Syntax OK
 * Starting web server lighttpd       
[ OK ]
SSID setting successful
BSS started!
Starting very small DHCP server: udhcpd (v0.9.9-pre) started
udhcpd.
 * Starting DNS forwarder and DHCP server dnsmasq         * (already running)
 * Starting bluetooth       
[ OK ]

Ubuntu 9.04 ubuntu ttyS0

ubuntu login:
Logged
NewITJames
Pages: [1]
 
 

Powered by MySQL Powered by PHP SMF 2.0.10 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!