New IT forum
27 June 2022, 12:47:18 pm *
Welcome, %1$s. Please login or register.

: PiHub now in stock.
 
Pages: [1]

Author Topic: Seagate FA GoFlex 3TB Usb 3 drive mount problems.  (Read 7393 times)

BC2000

  • Newbie
  • *
  • Posts: 5
Seagate FA GoFlex 3TB Usb 3 drive mount problems.
« on: 12 February 2012, 12:48:22 pm »

Hi

I need some guidance  :)
I purchased a Seagate 3TB Usb Drive which turned out not to be the brightest idea this year.
My plan is to use it as a data drive on my Dreamplug running Debian Squeeze.

At first the drive wasn't recognized but after running "different versions" of this guide:
http://www.cyberciti.biz/tips/fdisk-unable-to-create-partition-greater-2tb.html
I managed to get a 2 TB partition which mounted automatically in my Dreamplug and i was able to add some data to it but then i got "greedy" and wanted to add yet another partition of 1 TB on now the drive didnt want to mount no more.
All the disk management was done on my Ubuntu 10.04 desktop PC using "Parted" and here the drive is recognized every time i messed with the drive.

But now no matter what i try i cant see any evidence of the drive been recognized on my Dreamplug.

I use dmesg to try and see if there is any error but i cant find anything.
I know there a lot of issues (read this after i bought the damn drive) with Seagate GoFlex 3TB drives but for now i would settle with just two partitions of 2+1 TB on my Dreamplug but this is not possible.

Im i missing something here or should Debian and kernel 2.6.38 not be able to handle GPT support and where to go from now ?
 
my dmesg output looks like this note i have also attached a 1.5 TB drive for now:

Initializing cgroup subsys cpu
Linux version 2.6.38.8 ([email protected]) (gcc version 4.5.3 (PlugComputer G++ 20110530) ) #7 PREEMPT Sat Jun 25 18:13:16 MDT 2011
CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
CPU: VIVT data cache, VIVT instruction cache
Machine: Marvell GuruPlug Reference Board
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 131072
free_area_init_node: node 0, pgdat c0515c4c, node_mem_map c05e6000
  Normal zone: 1024 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 130048 pages, LIFO batch:31
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
pcpu-alloc:
  • 0

Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
Kernel command line: console=ttyS0,115200 root=/dev/sdb2 panic=10 rootwait
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 513716k/513716k available, 10572k reserved, 0K highmem
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
    vmalloc : 0xe0800000 - 0xfe800000   ( 480 MB)
    lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .init : 0xc0008000 - 0xc002e000   ( 152 kB)
      .text : 0xc002e000 - 0xc04e66d8   (4834 kB)
      .data : 0xc04e8000 - 0xc0517f78   ( 192 kB)
SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Preemptable hierarchical RCU implementation.
   RCU-based detection of stalled CPUs is disabled.
   Verbose stalled-CPUs detection is disabled.
NR_IRQS:114
sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Console: colour dummy device 80x30
Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
devtmpfs: initialized
NET: Registered protocol family 16
Kirkwood: MV88F6281-A1, TCLK=200000000.
Feroceon L2: Cache support initialised.
initial MPP regs: 01112222 11113311 33331111 33333333 00003333 00000222 00000000
  final MPP regs: 01112222 11113311 33331111 33333333 00003333 00000222 00000000
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
Switched to NOHz mode on CPU #0
FS-Cache: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
FS-Cache: Netfs 'nfs' registered for caching
JFS: nTxBlock = 4013, nTxLock = 32107
msgmni has been set to 1003
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
net eth0: port 0 with MAC address f0:ad:4e:00:82:3f
net eth1: port 0 with MAC address f0:ad:4e:00:82:40
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mousedev: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
Registered led device: guruplug:red:health
Registered led device: guruplug:green:health
Registered led device: guruplug:red:wmode
Registered led device: guruplug:green:wmode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
oprofile: hardware counters not available
oprofile: using timer interrupt.
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
Gating clock of unused units
before: 0x00dfc3fd
 after: 0x00cf41d9
registered taskstats version 1
rtc-mv rtc-mv: setting system clock to 2012-02-12 09:53:59 UTC (1329040439)
Waiting for root device /dev/sdb2...
mmc0: new high speed SDIO card at address 0001
usb 1-1: new high speed USB device using orion-ehci and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using orion-ehci and address 3
scsi0 : usb-storage 1-1.1:1.0
usb 1-1.4: new full speed USB device using orion-ehci and address 4
input: C-Media USB Headphone Set   as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.3/input/input0
generic-usb 0003:0D8C:000C.0001: input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-orion-ehci.0-1.4/input3
scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:0:1: Direct-Access     Generic  STORAGE DEVICE   9909 PQ: 0 ANSI: 0
sd 0:0:0:0: [sda] 3842048 512-byte logical blocks: (1.96 GB/1.83 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:1: Attached scsi generic sg1 type 0
sd 0:0:0:1: [sdb] 8011776 512-byte logical blocks: (4.10 GB/3.82 GiB)
sd 0:0:0:1: [sdb] Write Protect is off
sd 0:0:0:1: [sdb] Mode Sense: 03 00 00 00
sd 0:0:0:1: [sdb] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sda: p2 size 3653412 extends beyond EOD, enabling native capacity
sd 0:0:0:1: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1 sda2
sda: p2 size 3653412 extends beyond EOD, truncated
sd 0:0:0:1: [sdb] Assuming drive cache: write through
sd 0:0:0:1: [sdb] Attached SCSI removable disk
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
EXT3-fs: barriers not enabled
EXT3-fs (sdb2): warning: maximal mount count reached, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): recovery complete
EXT3-fs (sdb2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:18.
Freeing init memory: 152K
uap_probe: vendor=0x02DF device=0x9104 class=0 function=1
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 1
scsi1 : sata_mv
ata1: SATA max UDMA/133 irq 21
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
UAP FW is active
ata1: SATA link down (SStatus 0 SControl F300)
btmrvl_sdio: Unknown parameter `helper_name'
usbcore: registered new interface driver snd-usb-audio
mcypt: module license 'Marvell Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
eth1: link up, 100 Mb/s, half duplex, flow control disabled
NET: Registered protocol family 10
ADDRCONF(NETDEV_UP): eth0: link is not ready
sshd (1303): /proc/1303/oom_adj is deprecated, please use /proc/1303/oom_score_adj instead.
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
eth1: no IPv6 routers present
usb 1-1.3: new high speed USB device using orion-ehci and address 5
scsi2 : usb-storage 1-1.3:1.0
usbcore: registered new interface driver uas
scsi 2:0:0:0: Direct-Access     ST315003 43AS                  PQ: 0 ANSI: 2 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdc] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 38 00 00
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Assuming drive cache: write through
 sdc: sdc1 sdc2 sdc3 < sdc5 >
sd 2:0:0:0: [sdc] Assuming drive cache: write through
sd 2:0:0:0: [sdc] Attached SCSI disk
Logged

BC2000

  • Newbie
  • *
  • Posts: 5
Re: Seagate FA GoFlex 3TB Usb 3 drive mount problems.
« Reply #1 on: 27 January 2014, 12:44:02 pm »

Case Solved.
Found the solution her:
http://www.newit.co.uk/forum/index.php/topic,3984.0.html
and here:
http://www.newit.co.uk/forum/index.php/topic,385.0.html

Did what Manscher concluded.... upgrade to Wheezy.... however I figured I would spent too much time trying to upgrade since I have no idea how to to this and hence .....bought a new SD card from NewIT with Wheezy...
Did a power up of my Dreamplug -> attached the 3 TB drive... and it works.

For some reason there is not support for large disks in Debian 6.0 even though I found many evidence that there should be.

Thanks to Manscher for posting what to do.
Logged
Pages: [1]
 
 

Powered by MySQL Powered by PHP SMF 2.0.10 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!