New IT forum
26 June 2022, 05:01:17 pm *
Welcome, %1$s. Please login or register.

: PiHub now in stock.
 
Pages: [1]

Author Topic: Bootlog from a 1001 wireless 'n' Dreamplug  (Read 6116 times)

NewIT_Malcolm

  • Administrator
  • Jr. Member
  • *****
  • Posts: 65
Bootlog from a 1001 wireless 'n' Dreamplug
« on: 28 August 2012, 12:19:42 pm »

Code: [Select]
U-Boot 2011.06 (Oct 15 2011 - 02:02:08)
Marvell-DreamPlug

SoC:   Kirkwood 88F6281_A0
DRAM:  512 MiB
SF: Detected MX25L1606 with page size 256, total 1 MiB
In:    serial
Out:   serial
Err:   serial
Net:   egiga0, egiga1
88E1121 Initialized on egiga0
88E1121 Initialized on egiga1
Hit any key to stop autoboot:  3 \0x08\0x08\0x08 2 \0x08\0x08\0x08 1 \0x08\0x08\0x08 0
No link on egiga0
No link on egiga1
ping failed; host 192.168.2.1 is not alive
No link on egiga1
No link on egiga0
ping failed; host 192.168.2.1 is not alive
(Re)start USB...
USB:   Register 10011 NbrPorts 1
USB EHCI 1.00
scanning bus for devices... 6 USB Device(s) found
       scanning bus for storage devices... Device NOT ready
   Request Sense returned 02 3A 00
2 Storage Device(s) found
Loading file "uImage" from usb device 0:1 (usbda1)
3032428 bytes read
## Booting kernel from Legacy Image at 06400000 ...
   Image Name:   Linux-2.6.39.4
   Created:      2012-03-31  20:14:21 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    3032364 Bytes = 2.9 MiB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[    0.000000] Linux version 2.6.39.4 ([email protected]) (gcc version 4.2.1) #62 PREEMPT Sat Mar 31 16:14:14 EDT 2012
[    0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[    0.000000] CPU: VIVT data cache, VIVT instruction cache
[    0.000000] Machine: Marvell GuruPlug Reference Board
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: console=ttyS0,115200 rw root=/dev/sda2 rootdelay=10
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 512MB = 512MB total
[    0.000000] Memory: 512664k/512664k available, 11624k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
[    0.000000]     vmalloc : 0xe0800000 - 0xfe800000   ( 480 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .init : 0xc0008000 - 0xc0031000   ( 164 kB)
[    0.000000]       .text : 0xc0031000 - 0xc05eea8c   (5879 kB)
[    0.000000]       .data : 0xc05f0000 - 0xc0622628   ( 202 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptable hierarchical RCU implementation.
[    0.000000] \0x09RCU-based detection of stalled CPUs is disabled.
[    0.000000] \0x09Verbose stalled-CPUs detection is disabled.
[    0.000000] NR_IRQS:114
[    0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
[    0.000000] Console: colour dummy device 80x30
[    0.750807] Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
[    0.840743] pid_max: default: 32768 minimum: 301
[    0.840891] Mount-cache hash table entries: 512
[    0.841196] CPU: Testing write buffer coherency: ok
[    0.843272] NET: Registered protocol family 16
[    0.844694] Kirkwood: MV88F6281-A1, TCLK=200000000.
[    0.844708] Feroceon L2: Cache support initialised.
[    0.864234] bio: create slab <bio-0> at 0
[    0.864840] vgaarb: loaded
[    0.865402] SCSI subsystem initialized
[    0.866537] usbcore: registered new interface driver usbfs
[    0.866848] usbcore: registered new interface driver hub
[    0.867043] usbcore: registered new device driver usb
[    0.869010] cfg80211: Calling CRDA to update world regulatory domain
[    0.869813] Switching to clocksource orion_clocksource
[    0.870732] Switched to NOHz mode on CPU #0
[    0.891688] NET: Registered protocol family 2
[    0.891913] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.892641] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.892997] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    0.893200] TCP: Hash tables configured (established 16384 bind 16384)
[    0.893210] TCP reno registered
[    0.893221] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.893244] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.893497] NET: Registered protocol family 1
[    0.893802] RPC: Registered udp transport module.
[    0.893812] RPC: Registered tcp transport module.
[    0.893821] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.993653] JFFS2 version 2.2. (NAND) \0xc2\0xa9 2001-2006 Red Hat, Inc.
[    0.995121] JFS: nTxBlock = 4005, nTxLock = 32041
[    0.996508] msgmni has been set to 1001
[    0.997428] io scheduler noop registered
[    0.997440] io scheduler deadline registered
[    0.997538] io scheduler cfq registered (default)
[    1.004511] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    1.025456] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[    1.385720] console [ttyS0] enabled
[    1.389897] gpio_btn is called sucessfully! the initial value is 1
[    1.403888] brd: module loaded
[    1.411127] loop: module loaded
[    1.416996] m25p80 spi0.0: mx25l12805d (1024 Kbytes)
[    1.424540] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[    1.431796] mv643xx_eth smi: probed
[    1.438821] mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address f0:ad:4e:01:57:xx
[    1.451076] mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address f0:ad:4e:01:57:xx
[    1.460276] usbcore: registered new interface driver zd1201
[    1.465880] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.472533] orion-ehci orion-ehci.0: Marvell Orion EHCI
[    1.477841] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[    1.509868] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[    1.529856] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[    1.536415] hub 1-0:1.0: USB hub found
[    1.540247] hub 1-0:1.0: 1 port detected
[    1.544796] Initializing USB Mass Storage driver...
[    1.549951] usbcore: registered new interface driver usb-storage
[    1.555981] USB Mass Storage support registered.
[    1.560792] usbcore: registered new interface driver ums-datafab
[    1.566991] usbcore: registered new interface driver ums-freecom
[    1.573194] usbcore: registered new interface driver ums-jumpshot
[    1.579475] usbcore: registered new interface driver ums-sddr09
[    1.585597] usbcore: registered new interface driver ums-sddr55
[    1.591936] mousedev: PS/2 mouse device common for all mice
[    1.598132] rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
[    1.604315] i2c /dev entries driver
[    1.608408] cpuidle: using governor ladder
[    1.613114] cpuidle: using governor menu
[    1.617089] mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
[    1.623578] mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
[    1.669899] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[    1.709896] mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
[    1.749905] mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
[    1.789896] mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
[    1.796010] sdhci: Secure Digital Host Controller Interface driver
[    1.802282] sdhci: Copyright(c) Pierre Ossman
[    1.806915] mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
[    1.820300] usbcore: registered new interface driver usbhid
[    1.825900] usbhid: USB HID core driver
[    1.829746] oprofile: hardware counters not available
[    1.835089] oprofile: using timer interrupt.
[    1.842002] TCP cubic registered
[    1.845244] NET: Registered protocol family 17
[    1.852000] lib80211: common routines for IEEE802.11 drivers
[    1.857719] Registering the dns_resolver key type
[    1.862515] usb 1-1: new high speed USB device number 2 using orion-ehci
[    1.870850] rtc-mv rtc-mv: setting system clock to 2012-05-21 19:19:10 UTC (1337627950)
[    1.879149] Waiting 10sec before mounting root device...
[    1.903113] mmc0: new high speed SDIO card at address 0001
[    2.021007] hub 1-1:1.0: USB hub found
[    2.024925] hub 1-1:1.0: 4 ports detected
[    2.299936] usb 1-1.1: new high speed USB device number 3 using orion-ehci
[    2.431001] hub 1-1.1:1.0: USB hub found
[    2.435053] hub 1-1.1:1.0: 4 ports detected
[    2.540072] usb 1-1.4: new full speed USB device number 4 using orion-ehci
[    2.674304] input: C-Media USB Headphone Set   as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.3/input/input0
[    2.685359] generic-usb 0003:0D8C:000C.0001: input: USB HID v1.00 Device [C-Media USB Headphone Set  ] on usb-orion-ehci.0-1.4/input3
[    2.789954] usb 1-1.1.1: new high speed USB device number 5 using orion-ehci
[    2.924997] usb-storage 1-1.1.1:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    2.932245] scsi0 : usb-storage 1-1.1.1:1.0
[    3.029957] usb 1-1.1.2: new high speed USB device number 6 using orion-ehci
[    3.164985] usb-storage 1-1.1.2:1.0: Quirks match for vid 05e3 pid 0723: 8000
[    3.172235] scsi1 : usb-storage 1-1.1.2:1.0
[    3.931520] scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    3.940825] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.099888] sd 0:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
[    4.108926] sd 0:0:0:0: [sda] Write Protect is off
[    4.113800] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.123198] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.138389]  sda: sda1 sda2 sda3
[    4.144574] sd 0:0:0:0: [sda] Assuming drive cache: write through
[    4.150724] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    4.171373] scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
[    4.180637] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    4.189716] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[   11.895010] EXT3-fs: barriers not enabled
[   12.291324] EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
[   12.300098] kjournald starting.  Commit interval 5 seconds
[   12.306846] EXT3-fs (sda2): using internal journal
[   12.311683] EXT3-fs (sda2): recovery complete
[   12.316966] EXT3-fs (sda2): mounted filesystem with writeback data mode
[   12.323667] VFS: Mounted root (ext3 filesystem) on device 8:2.
[   12.329584] Freeing init memory: 164K

INIT: version 2.88 booting

Using makefile-style concurrent boot in runlevel S.
.udev/ already exists on the static /dev! ... \0x1b[33m(warning).\0x1b[39;49m
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...[   14.129123] sata_mv sata_mv.0: version 1.28
[   14.361277] sata_mv sata_mv.0: slots 32 ports 1
[   14.498991] scsi2 : sata_mv
[   14.546980] ata1: SATA max UDMA/133 irq 21
[   14.949951] ata1: SATA link down (SStatus 0 SControl F300)
[   15.459056] usbcore: registered new interface driver snd-usb-audio
[   20.021348] EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
done.
Setting preliminary keymap...setupcon: None of /etc/default/keyboard nor //.console-setup exists.
\0x1b[31mfailed.\0x1b[39;49m
Activating swap...done.
Cleaning up ifupdown....
Setting up networking....
Loading kernel modules...done.
Activating lvm and md swap...done.
Checking file systems...fsck from util-linux-ng 2.17.2
done.
Mounting local filesystems...done.
Activating swapfile swap...done.
Cleaning up temporary files....
Configuring network interfaces...Ignoring unknown interface eth1=eth1.
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/f0:ad:4e:01:57:xx
Sending on   LPF/eth0/f0:ad:4e:01:57:xx
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
if-up.d/mountnfs[eth0]: waiting for interface eth1 before doing NFS mounts ... (warning).
done.
Starting portmap daemon....
Cleaning up temporary files....
Setting up ALSA...done.
Setting console screen modes.
cannot (un)set powersave mode
\0x1b[9;30]\0x1b[14;30]Skipping font and keymap setup (handled by console-setup).
Setting up console font and keymap...setupcon: None of /etc/default/keyboard nor //.console-setup exists.
\0x1b[31mfailed.\0x1b[39;49m
Setting kernel variables ...done.

INIT: Entering runlevel: 2

Using makefile-style concurrent boot in runlevel 2.
Starting portmap daemon...Already running..
Starting file alteration monitor: FAM.
Starting enhanced syslogd: rsyslogd.
Starting Samba daemons: nmbd smbd[   95.541046] NET: Registered protocol family 10
[   95.548334] ADDRCONF(NETDEV_UP): eth0: link is not ready
.
Starting web server: apache2apache2: apr_sockaddr_info_get() failed for dreamplug-debian
apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName
.
Starting system message bus: dbus.
Starting periodic command scheduler: cron.
[   96.738466] Bluetooth: Core ver 2.16
[   96.768975] NET: Registered protocol family 31
[   96.778712] Bluetooth: HCI device and connection manager initialized
[   96.817082] Bluetooth: HCI socket layer initialized
[   96.828097] Bluetooth: L2CAP socket layer initialized
Starting bluetooth: bluetoothd.
[   96.863497] Bluetooth: SCO socket layer initialized
[   96.971207] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   96.976547] Bluetooth: BNEP filters: protocol multicast
[   97.185579] Bridge firewalling registered
Not starting internet superserver: no services enabled.
Starting MTA: exim4.
ALERT: exim paniclog /var/log/exim4/paniclog has non-zero size, mail system possibly broken ... \0x1b[31mfailed!\0x1b[39;49m
[   98.344554] sshd (2031): /proc/2031/oom_adj is deprecated, please use /proc/2031/oom_score_adj instead.
Starting OpenBSD Secure Shell server: sshd.
Starting Hardware abstraction layer: hald.
[   99.123578] mlan: module license 'Marvell Proprietary' taints kernel.
[   99.130558] Disabling lock debugging due to kernel taint
[   99.908884] WLAN FW is active
[  100.023794] ADDRCONF(NETDEV_UP): uap0: link is not ready
SSID setting successful
BSS start successful!
WARNING: All config files need .conf: /etc/modprobe.d/aliases, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/linux-sound-base_noOSS, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/arch, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignore[  100.289445] ip_tables: (C) 2000-2006 Netfilter Core Team
d in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/alsa-base-blacklist, it will be ignored in a future release.
[  100.356472] nf_conntrack version 0.5.0 (8012 buckets, 32048 max)
Starting very small Busybox based DHCP server: Starting /usr/sbin/udhcpd...
udhcpd.
Starting DNS forwarder and DHCP server: dnsmasq.
Starting bluetooth: bluetoothd[  100.697981] Bluetooth: RFCOMM socket layer initialized
[  100.703678] Bluetooth: RFCOMM ver 1.11
.
[  100.800063] BT FW is active(0)
[  100.803136] BT FW already downloaded!
Traceback (most recent call last):
  File "/usr/bin/mute-agent", line 3, in <module>
    import gobject
ImportError: No module named gobject

Debian GNU/Linux 6.0 dreamplug-debian ttyS0

dreamplug-debian login:
Logged
Pages: [1]
 
 

Powered by MySQL Powered by PHP SMF 2.0.10 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!