New IT forum
25 February 2018, 01:33:27 am *
Welcome, %1$s. Please login or register.

: GertDuino now in stock.
 
Pages: [1]

Author Topic: Mainstream kernel ArcNumbers for Open-Rd variants  (Read 16013 times)

superpat

  • Moderator
  • Newbie
  • *****
  • Posts: 32
Mainstream kernel ArcNumbers for Open-Rd variants
« on: 13 June 2010, 12:17:19 pm »



Hi

Open-rd base          2325

Open-rd client         2361

Open-rd- Ultimate    2884


cheers

P
Logged

fd64

  • Newbie
  • *
  • Posts: 5
Re: Mainstream kernel ArcNumbers for Open-Rd variants
« Reply #1 on: 22 December 2010, 12:51:06 pm »

I would like to post my experience about these ArcNumbers.

I was trying to set this numbers using "setenv arcNumber 2884" on my OpenRD-ultimate without saving the environment ("saveenv") because I wanted to test it first. But the "arcNumber" is only considered by the kernel if you do the "saveenv".

So here is how to make it work with recent kernels:
Code: [Select]
Marvell>> setenv mainlineLinux yes
Marvell>> setenv arcNumber 2884
Marvell>> saveenv
With these commands we can boot a recent mainline kernel such as 2.6.36. Older kernels don't have support for the OpenRD-ultimate, or need patches (they are in Debian squeeze 2.6.32)

The problem with these environment variables is they break the original Fedora8 / 2.6.22 system. So we have to revert these changes if we want to boot the original environment:
Code: [Select]
Marvell>> setenv mainlineLinux no
Marvell>> setenv arcNumber
Marvell>> saveenv

So one good solution is to first recompile a recent (>= 2.6.36) linux kernel from the original Fedora8, install it, and then change the arcNumber variable.
Logged
Pages: [1]
 
 

Powered by MySQL Powered by PHP SMF 2.0.10 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!