New IT forum
17 July 2018, 07:54:44 am *
Welcome, %1$s. Please login or register.

: PiHub now in stock.
 
Pages: [1]

Author Topic: New Mimo 720S issue with Guiplug on Dreamplug  (Read 4163 times)

rzingel

  • Newbie
  • *
  • Posts: 4
New Mimo 720S issue with Guiplug on Dreamplug
« on: 23 April 2014, 03:12:17 pm »

I'm having some issues with a brand new Mimo 720s monitor with guiplug on the dreamplug.

Everything works but the X axis is reversed on the touch screen.  I tried changing the invertX in the xorg.conf files but that doesn't seem to change anything.  It appears that this touch screen is coming in as an HID-mouse.

Here is the dmesg output
Code: [Select]
gpiochip_add: registered GPIOs 0 to 31 on device: orion_gpio0
gpiochip_add: registered GPIOs 32 to 49 on device: orion_gpio1
sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms
Console: colour dummy device 80x30
Calibrating delay loop... 1191.11 BogoMIPS (lpj=5955584)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x3ea420 - 0x3ea45c
devtmpfs: initialized
NET: Registered protocol family 16
Kirkwood: MV88F6281-A1, TCLK=200000000.
Feroceon L2: Cache support initialised.
initial MPP regs: 01112222 11113311 33331111 33333333 00003333 00000222 00000000
  final MPP regs: 01112222 11113311 33331111 33333333 00003333 00000222 00000000
bio: create slab <bio-0> at 0
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource orion_clocksource
FS-Cache: Loaded
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
PCI: CLS 0 bytes, default 32
NFS: Registering the id_resolver key type
FS-Cache: Netfs 'nfs' registered for caching
JFS: nTxBlock = 4012, nTxLock = 32101
msgmni has been set to 1003
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
mv_xor_shared mv_xor_shared.0: Marvell shared XOR driver
mv_xor_shared mv_xor_shared.1: Marvell shared XOR driver
mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
mv_xor mv_xor.1: Marvell XOR: ( xor fill cpy )
mv_xor mv_xor.2: Marvell XOR: ( xor cpy )
mv_xor mv_xor.3: Marvell XOR: ( xor fill cpy )
Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
console [ttyS0] enabled
brd: module loaded
loop: module loaded
mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
mv643xx_eth smi: probed
mv643xx_eth_port mv643xx_eth_port.0: eth0: port 0 with MAC address f0:ad:4e:02:83:93
mv643xx_eth_port mv643xx_eth_port.1: eth1: port 0 with MAC address f0:ad:4e:02:83:94
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
orion-ehci orion-ehci.0: Marvell Orion EHCI
orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
mousedev: PS/2 mouse device common for all mice
rtc-mv rtc-mv: rtc core: registered rtc-mv as rtc0
i2c /dev entries driver
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
sdhci-pltfm: SDHCI platform and OF driver helper
Registered led device: guruplug:red:health
Registered led device: guruplug:green:health
Registered led device: guruplug:red:wmode
Registered led device: guruplug:green:wmode
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
Registering the dns_resolver key type
Gating clock of unused units
before: 0x00dfc3fd
 after: 0x00cf41d9
registered taskstats version 1
rtc-mv rtc-mv: setting system clock to 2013-05-25 01:00:31 UTC (1369443631)
Waiting for root device /dev/sdb2...
mmc0: new high speed SDIO card at address 0001
usb 1-1: new high-speed USB device number 2 using orion-ehci
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high-speed USB device number 3 using orion-ehci
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 4 ports detected
usb 1-1.2: new high-speed USB device number 4 using orion-ehci
hub 1-1.2:1.0: USB hub found
hub 1-1.2:1.0: 4 ports detected
usb 1-1.4: new full-speed USB device number 5 using orion-ehci
input: C-Media Electronics Inc.       USB PnP Sound Device as /devices/platform/orion-ehci.0/usb1/1-1/1-1.4/1-1.4:1.3/input/input0
generic-usb 0003:0D8C:013C.0001: input: USB HID v1.00 Device [C-Media Electronics Inc.       USB PnP Sound Device] on usb-orion-ehci.0-1.4/input3
usb 1-1.1.1: new high-speed USB device number 6 using orion-ehci
usb-storage 1-1.1.1:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi0 : usb-storage 1-1.1.1:1.0
usb 1-1.1.2: new high-speed USB device number 7 using orion-ehci
usb-storage 1-1.1.2:1.0: Quirks match for vid 05e3 pid 0723: 8000
scsi1 : usb-storage 1-1.1.2:1.0
usb 1-1.2.1: new high-speed USB device number 8 using orion-ehci
usb 1-1.2.2: new full-speed USB device number 9 using orion-ehci
input: Microchip Technology Inc. AR1100 HID-MOUSE as /devices/platform/orion-ehci.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/input/input1
generic-usb 0003:04D8:0C02.0002: input: USB HID v1.11 Mouse [Microchip Technology Inc. AR1100 HID-MOUSE] on usb-orion-ehci.0-1.2.2/input0
scsi 0:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 7744512 512-byte logical blocks: (3.96 GB/3.69 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
scsi 1:0:0:0: Direct-Access     Generic  STORAGE DEVICE   9451 PQ: 0 ANSI: 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] No Caching mode page present
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 1:0:0:0: [sdb] 31268864 512-byte logical blocks: (16.0 GB/14.9 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] No Caching mode page present
sd 1:0:0:0: [sdb] Assuming drive cache: write through
sd 1:0:0:0: [sdb] Attached SCSI removable disk
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with writeback data mode
VFS: Mounted root (ext3 filesystem) on device 8:18.
devtmpfs: mounted
Freeing init memory: 168K
udev[693]: starting version 164
sata_mv sata_mv.0: version 1.28
sata_mv sata_mv.0: slots 32 ports 1
scsi2 : sata_mv
ata1: SATA max UDMA/133 irq 21
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
cfg80211: Calling CRDA to update world regulatory domain
ata1: SATA link down (SStatus 0 SControl F300)
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
mwifiex_sdio mmc0:0001:1: WLAN FW is active
usbcore: registered new interface driver snd-usb-audio
mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (14.57.5.p85)
Bluetooth: vendor=0x2df, device=0x911a, class=255, fn=2
udlfb: DisplayLink MIMO - serial #1253001840
udlfb: vid_17e9&pid_016b&rev_0464 driver's dlfb_data struct at df0e7800
udlfb: console enable=1
udlfb: fb_defio enable=1
udlfb: shadow enable=1
udlfb: vendor descriptor length:17 data:17 5f 01 0015 05 00 01 03 00 04
udlfb: DL chip limited to 1500000 pixel modes
udlfb: allocated 4 65024 byte urbs
usbcore: registered new interface driver udlfb
udlfb: 800x480 @ 59 Hz valid mode
udlfb: Reallocating framebuffer. Addresses will change!
udlfb: 800x480 @ 59 Hz valid mode
udlfb: set_par mode 800x480
udlfb: DisplayLink USB device /dev/fb0 attached. 800x480 resolution. Using 1504K framebuffer memory
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
fuse init (API version 7.18)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bridge firewalling registered
udlfb: open /dev/fb0 user=1 fb_info=df0e1c00 count=1
udlfb: released /dev/fb0 user=1 count=0
udlfb: open /dev/fb0 user=1 fb_info=df0e1c00 count=1
udlfb: /dev/fb0 FB_BLANK mode 0 --> 1
sshd (1584): /proc/1584/oom_adj is deprecated, please use /proc/1584/oom_score_adj instead.
udlfb: /dev/fb0 FB_BLANK mode 1 --> 0
udlfb: /dev/fb0 FB_BLANK mode 0 --> 0
EXT2-fs (sda1): warning: mounting unchecked fs, running e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT3-fs (sda2): using internal journal
EXT3-fs (sda2): mounted filesystem with writeback data mode
root@guiplug:/usr/share/X11/xorg.conf.d#

here is the lsusb output
Code: [Select]
root@guiplug:/usr/share/X11/xorg.conf.d# lsusb
Bus 001 Device 009: ID 04d8:0c02 Microchip Technology, Inc.
Bus 001 Device 008: ID 17e9:016b Newnham Research
Bus 001 Device 007: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 006: ID 05e3:0723 Genesys Logic, Inc. GL827L SD/MMC/MS Flash Card Reader
Bus 001 Device 005: ID 0d8c:013c C-Media Electronics, Inc.
Bus 001 Device 004: ID 058f:6254 Alcor Micro Corp. USB Hub
Bus 001 Device 003: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 001 Device 002: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@guiplug:/usr/share/X11/xorg.conf.d#

Any help would be greatly appreciated
Logged

rzingel

  • Newbie
  • *
  • Posts: 4
Re: New Mimo 720S issue with Guiplug on Dreamplug
« Reply #1 on: 23 April 2014, 04:41:34 pm »

Ok,

After some digging I got it to work by modifying the section of xorg.conf to this:

Code: [Select]
Section "InputClass"
        Identifier "Microchip touchscreen catchall"
  MatchVendor "Microchip_Technology"
        MatchDevicePath "/dev/input/event*"
  Driver "evdev"
        Option "Emulate3Buttons" "false"
        Option "InvertX" "true"
        Option "InvertY" "false"
        Option "SwapAxes" "false"
        Option "Calibration" "110 3973 170 3960"
EndSection

Logged

Ralph Houston

  • New IT customer
  • Full Member
  • *
  • Posts: 136
Re: New Mimo 720S issue with Guiplug on Dreamplug
« Reply #2 on: 24 April 2014, 07:19:46 am »

Well done - Linux is getting rather geological - you dig down through the layers and always wonder whether what you have found has another layer on top that overrides it.
Logged
Pages: [1]
 
 

Powered by MySQL Powered by PHP SMF 2.0.10 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!